无码中文av有码中文av|日本高清久久天堂|亚洲人成人一区二区在线观看 |国产成人综合久久|日韩久久精品

三槽電解式模具清洗機
  • 三槽電解式模具清洗機

  • 產品分類:電解模具清洗機系列

  • 產品品牌:

  • 會員價格:¥85000.00

  • 發布日期:2025-7-16 10:10:33

  • 產品簡介:

    電解超聲波模具清洗機原理:Electroanalysis ultrasonic mould cleaner principle 電解超聲波是由電解超聲波清洗槽,噴淋清洗槽,超聲波系統,電解電路系統,電極,托盤,過濾循環系統,定時裝置,面板電器開關裝置組成。 Electroanalysis ultrasonic includes electroanalysis ultrasonic wash tank, spray wash tank, ultrasonic system, electroanalysis circuit system, electrode, tray, filtration cycling system, timing setting and panel switch. 1,電解清洗是利用電解作用將金屬表面的污垢去除的清洗方法;電解是在電流作用下,物質發生化學分解的過程.在電解過程中,金屬表面的污垢開始脫落,在超聲波的沖擊下加速了剝離,在金屬表面沾有動植物油,礦物油,銹跡,銹斑,積炭,氧化層.用電解的方法把這些污垢去除叫電解脫脂。Electroanalysis cleaning is a method by electroanalysis function to remove the dirt from metal surface; electroanalysis is a process which the matter with chemical decomposition. The dirt of the metal surface fall off during the electroanalysis, and accelerate the peel off speed with the concussion from ultrasonic. The electrolytic method is used to remove the propagation oil, mineral oil, rust spots, oxide layer from metal surface which is called electroanalysis degrease. 當電流通過含有特殊配方的電解質的水溶液時,在電解槽的正極附近產生氧氣,負極產生氫氣.把要清洗的金屬部件放入電解槽的正極(清洗籃),在電解過程中,在金屬表面會有細小的氫氣產生,這些小氣泡促使污垢從金屬表面剝離。 The anode of the electrobath will produce Oxygen and cathode will produce the hydrogen when there is current pass water solution with special electrolytical mixture. Put the metal parts into the anode of the electrobath(clean basket), there will produce small hydrogen on the metal surface, and these small air bubbles will prompt the dirt peel off from metal surface. 2,超聲波清洗是利用28KHZ的高頻電源,使換能器由電能轉換機械能的過程,在這過程中換能器向清洗槽溶液傳遞巨大的能量,在液體中產生正壓和負壓區,形成數以萬計的空穴氣泡,在不斷的形成爆炸,沖擊被清洗金屬物表面,使金屬表面的污垢快速脫離。 The ultrasonic cleaning use the 28KHZ high frequency power supply and the transducer by converting electric energy to mechanical energy. In the transducer to the cleaning solution tank transfer huge energy, produce positive pressure and negative pressure zone in the liquid, tens of thousands of cavitation bubbles formation, in continuous form into the explosion, the impact is cleaning the metal surface and quickly out of the dirt on the surface of the metal.3,循環系統是由耐腐蝕的廣州小巨人磁力泵,過濾器組成自循環,讓清洗脫落的污垢迅速被過濾棉芯隔離,減少液面漂浮物.同時可加速溶液的電解。凈化溶液,提高溶液的利用率。 Circulatory system is by the corrosion of the little giant magnetic pump, filter self circulation, let washing off the dirt quickly filtered cotton core isolation, reduce the liquid surface floater. Also can accelerate the

  • 產品訂購熱線:13828757635
產品簡介:

一 HSD-3050LT電解模具清洗機技術參數描述

HSD-3050L Electroanalysis mould cleaner technology meter description

1,        HSD-3050LT洗模機,容積20L,超聲波震動板是由SUS2.50MM316不銹鋼板焊接而成;左右側板SUS2.0MM316不銹鋼板焊接而成;外封門板采用SUS316 1.0mm制作,外形尺寸,1800*800*900MM。

HSD-3050L cleaner, the cubage is 50L, ultrasonic shake panel is made of SUS2.50MM316 stainless steel panel soldering and SUS2.0MM316 stainless steel panels soldering for left and right side, the outside door is made of SUS316 1.0mm, the outline dimension is 1450*800*900MM

 

 

 

 

產 品 名  稱

Product Name

規格型號

Spec.

內槽尺寸

Inner dimension

機器功率

Power

電解式超聲波模具清洗機

Electroanalysis ultrasonic mould cleaner

HSD-3050L

500*400*250mm

1.2KW

洗凈籠采用SUS316扁鋼焊接而成,外包綠膠,耐酸耐堿,耐高溫,耐磨。

Wash tank is made of SUS316, wrapped with green glue, acid, alkali, high temperature and abrasion resistant

 

350*250*200mm

 

金型模具洗凈液(電解清洗液)

Golden mould clean liquid

HSD-102C

20L/桶

20L/bucket

 

三,接入電源單相三線制,交流電壓220V ,50-60HZ。Access power supply single-phase three wire system, AC voltage 220V,50-60HZ。

清洗工藝:電解清洗槽清洗15分鐘——→噴淋清洗槽清洗3分鐘——→防銹浸泡槽浸泡3分鐘——→拿出壓縮空氣吹干。

 

 

網上采購:
姓名:
*
手機或電話:
*
郵箱:
*
采購意向描述:
*
請?zhí)顚?strong style="color: #FF0000;">采購的產品數量和產品描述,方便我們進行統一備貨。
驗證碼:
換一組
相關產品
產品評論
 
  • 該產品沒有收到任何評價!

驗證碼:
看不清楚?點擊換張圖片