4，          在清洗模具時，請把模具放入清洗籃內，再把清洗籃放入機器清洗槽內。不要直接往清洗槽內扔模具。這樣會把清洗液飛濺到人的身體上。

in cleaning the mold, please put the mold into the cleaning basket, and then put the cleaning basket into the machine cleaning tank. Don't throw the mold directly into the sink. This will splash the cleaning liquid onto the human body.

5，          在使用過程中盡量少用手接觸模具清洗液，防止皮膚過敏，如果不小心讓接觸到身體皮膚請用大量清水沖洗；在正常情況下人手指短時間接觸模具清洗液后，用水沖洗后是不會造成傷害的。

5, in the process of using as little as possible by hand contact mold cleaning fluid, to prevent skin allergies, if not careful to make contact with the body skin, please rinse with plenty of water; contact mold cleaning fluid in normal human fingers after a short time, after washing with water is not harm.

6，          在使用過程中如果不小心飛濺到人眼睛里，請及時用大量清水沖洗或用食用白醋兌水沖洗，請急時送醫。

6, in the process of use, if not careful splash into the eyes, please use plenty of water rinse or use vinegar with water rinse, please send the doctor in urgent time.

7，          電解模具清洗液呈堿性，不能和酸性的清洗液混合使用，也不能和其它不明離子堿性清洗液混合使用。

the electrolytic mold cleaning liquid is alkaline, can not be mixed with acid cleaning liquid, and can not be mixed with other unknown ion cleaning liquid.

8，          模具電解清洗液使用后的廢液和廢去物不能隨便排放入下水道，應用塑膠桶收集，請有資質的環保公司處理，如本公司有污水處理系統方可排放。

8, the use of electrolytic cleaning liquid waste and waste materials can not be arbitrarily placed in the sewer, the discharge of plastic bucket collection, please qualified environmental protection company recycling, such as the company's sewage treatment system can handle.

9, 模具清洗液保質期為三年，清洗液在使用過程中，可以可連續使用2-3個月。或當清洗液渾濁變黑后請立即更換成新的清洗液。同時更換清洗機上不銹鋼過濾器里的過濾棉芯。

Mold cleaning fluid shelf life of three years, the cleaning liquid can be used in the process of continuous use for 2-3 months. Or when the cleaning solution becomes dark, please change it into a new cleaning solution immediately. Replace the filter cotton core in the stainless steel filter at the same time.