產品簡介：

Electroanalysis ultrasonic mould cleaner operational instruction 一， 電解超聲波（塑膠模具）清洗機原理描述 Electroanalysis ultrasonic(Plastic mould)cleaner process description 1，電解超聲波系統是由超聲波發生系統,電解電路系統,循環過濾系統,控制系統,專用的金型清洗液和水性防銹劑組成。Electroanalysis ultrasonic system concludes ultrasonic occurrence system, electroanalysis circuit system, cycle filtration system, control system, special cleaning liquid and waterborne anti – rust. 1,電解洗凈系統是向金屬表面發射氣體,用桑拿的效果除去金屬表面的臟物,不純物,還可以完全除去模具上的銹斑，積炭，瓦斯氣體，樹脂成分,濕氣,油污,通過超聲波的震動污垢剝離漂浮起來,金屬模具防在陰極,即使相當小的角落里的污垢也能完全去除。Electroanaly is cleaning system: remove the dirt of the surface with the sauna effectiveness by spraying the gas towards the metal surface, it also can completely remove the rust spots, carbon deposit gas, resins, humidity and oil stains on the surface of the mould. The principle of this system is to peel off the dirt and let them floating by ultrasonic shaking to remove the dirt even though the dirt is in the relatively small corners. 2，將金屬還原到原有的鋼綠色,恢復金屬原來的綺麗。Let the metal recover to intrinsic green 3,即使是復雜的形狀也可以去除污垢。Can remove the dirt even for the complicated shapes mould 4,能完全確實的潔凈去污。Can remove the dirt completely 5,有良好的除銹防銹效果。Have good anti-rust effect. 6,比人工清洗要節約一小時的時間。Can save 1 hour than manual work 7,比使用有機溶劑更環保更安全。More environmental and safe than using organic solvent 8,大大的降低了洗凈后不良率。Obviously reduce the rejection rate after cleaning. 設備用途：用于精密塑膠模具，模塊，模件，模仁，鑲針，鑲件，去高溫積碳，去硫化物，瓦斯氣體，油污，銹斑的清洗。 Equipment application: applied to precision plastic mould, module,insert, Pin,clean high temperature carbonium, clean sulfide, gas, oil dirt and rust spots cleaning